News

Home > News > Content
About Raw Materials For Customized Flat Slings
Jul 04, 2017

Customized Flat Slings with the world's most high-quality synthetic fiber as raw materials, the use of the most advanced international weaving technology and equipment, through a different sewing method from sewing, according to customer demand for production 4,5,6,7,8 times security Coefficient of the lifting belt, the production range of 0.5t-100t. And use the international standard color to identify the different carrying capacity, can also be based on bandwidth to distinguish. In the hoisting operation, the surface of the object will not cause harm.

According to different requirements of According to different requirements of lifting the environment, can be divided into: ordinary type, fire type, fluorescent type, high strength type, acid type, wear type, oil and other waterproof series. the environment, can be divided into: ordinary type, fire type, fluorescent type, high strength type, acid type, wear type, oil and other waterproof series.

Features: light, soft, high safety factor, long life, non-conductive, anti-corrosion, anti-static.

The flat hoisting belt is superior in performance: it offers a wide, smooth bearing surface that is particularly suitable when lifting objects with soft surfaces. If necessary, can also be equipped with a wider protective cover to use, because there is no metal contact, for the lifting of the object smooth and paint the surface of the damage caused by extremely slight.

1,the Customized Flat Slings is woven without any obvious defective fabric, and all the wires in the weaving process should be made of the same material.

Standard width: 25mm, 35mm, 50mm, 75mm, 100mm, 150mm, 200mm, 300mm. Bandwidth tolerance, when the bandwidth ≤ 100mm, the allowable deviation of ± 10%; when the bandwidth is greater than 100mm, the allowable deviation of ± 8%. Thickness should be uniform, when the harness is composed of multiple Customized Flat Slings, the strip thickness is the same. Sling colorants, paint, covering should be non-toxic, harmless.

2, the sewing seam should be used with the same material as the Customized Flat Slings quality sewing, sewing should be smooth. Sewing on the edge of the tape should be left on the edge of the distance, the thickness of not more than 10mm of the tape, leaving 2-4mm without suture; thickness of more than 10mm to stay 4-8mm tape without suture. Suture should be at the end of the "back seam" treatment, "back seam" length should not be less than 25mm.

3, the soft ring should not reduce the carrying capacity of the tape. The length of the soft ring should meet the following requirements: a. When the tape width is 25-35mm, the length of the soft ring should be 100mm; b. When the Customized Flat Slings width is 50-150mm, the length of the soft ring should be 3 times the width of the tape ; C. When the tape width is greater than 150mm, the length of the soft ring should be 2.5 times the width of the tape.

4, the end piece is attached to the soft ring of the metal parts, with the requirements of supporting the ring with a ring diameter should not be less than 2.5 times the diameter of the end pieces. The breaking strength of the end piece metal material should not be less than 4 times the limit working load of the sling. The end piece is not allowed to use casting parts.





Copyright © Hebei Jili Rigging Co.,Ltd All rights reserved.Tel: +86-312-6787976