Home > News > Content
How To Choose The Lifting Slings Properly
Jul 04, 2017

When selecting the Lifting Slings specifications, the size of the load to be lifted, the weight, the shape, and the method of using the common method of use are included in the calculation of the calculation, given the requirements of the ultimate working force, while working Environment, the type of load must be considered. It is necessary to select a Lifting Slings that has sufficient capacity and can meet the proper length of the way of use. If multiple Lifting Slings is used simultaneously, the same type of Lifting Slings must be used; the raw material of flat Lifting Slings can not be affected by the environment or Load effect. Regardless of whether the accessory or soft lugs are required, care must be taken to consider the end of the Lifting Slings and the auxiliary accessories and the lifting equipment.

Lifting Slings with lifting Note:

1, when lifting, the correct use of Lifting Slings with the connection. The Lifting Slings is properly positioned in a safe manner and the load is connected and the Lifting Slings is to be placed on the load so that the load can be balanced. The width of the Lifting Slings can not always be knotted or twisted. Lifting Slings can not be placed on the hook or Heavy equipment, and always placed on the upright part of the Lifting Slings, by keeping away from the load, hook and locking angle to prevent damage to the label.

2, to ensure the safety of personnel. In the lifting process, pay close attention to, to ensure the safety of personnel, must be warned in the dangerous state of the staff, if necessary, immediately withdraw from the dangerous area. The hands or other parts of the body must be kept away from the Lifting Slings to prevent damage when the Lifting Slings is slackened. In the hoisting process, you must use the exemplary lifting, Lifting Slings from the loose to pick up until the Lifting Slingss tighten, the load is gradually raised to a predetermined location, especially important in the basket or free tension when the friction Bear the load.

3, control the rotation of the load If the load tends to tilt, you must put down the weight, to ensure that the load is bound to prevent the accidental rotation of the load is guaranteed.

4, to avoid the Lifting Slings of the collision, drag, pull, friction, oscillation, to prevent damage to the Lifting Slings In the hoisting, we must pay attention to ensure that the load is bound to prevent accidental rollover or collision with other objects. Avoid dragging, pulling or oscillating the load, and if that would increase the force of the Lifting Slings. If the Lifting Slings is under load, or when the load is pressed against the Lifting Slings, it is not possible to tow the Lifting Slings on the surface of the ground or rough object.

5, the Lifting Slings with the lifting, the load will be in the case of equal constraints landing.

Copyright © Hebei Jili Rigging Co.,Ltd All rights reserved.Tel: +86-312-6787976